Menvier Security TS790+ Specifikace Strana 67
- Strana / 70
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
TS790+ & TS900+ Installation Manual Appendices
Users 02-31 may be programmed as "Reset
Only". This user type allows 24hr alarms to be
reset and access to "User menu 1" option 1 to
9.
Users 02-31 can be programmed as "Duress".
When this user type is entered a silent "Panic
Alarm" (i.e., Bell and sounders not triggered) is
transmitted to the central station via the
telephone line and remote signalling device (if
fitted). The user will still be able to set and unset
the alarm system and access "User menu 1".
All other user code types will generate a
"Duress" alarm if the passcode is entered with
the first two digits reversed (e.g., for a
standard passcode of 2580 enter 5280 to
generate a "Duress" alarm). If required, this
feature can be disabled by the installation
company or by making the first two digits of
the passcode the same.
Users 02-31 can be programmed as "PA Code".
When this user type is entered a "Panic Alarm"’ is
transmitted to the central station via the
telephone line and remote signalling device (if
fitted). The external sounder(s) and strobe light(s)
are also activated.
Users 02-31 can be programmed as "Access".
When this user type is entered any output that is
programmed as ‘ Access’ will activate for a pre-
set time. Normally this user type is used in
conjunction with an electric door strike
connected to the alarm system so that when
the passcode is entered the door strike is
operated to allow the user access into that
area.
Users 02-31 may be programmed as "Full Set
Group". This user type only allows the wards
assigned by the installation company or master
user to be set and unset. This user type does not
have access to any user menus.
Users 02-31 can be programmed as "Code Set
Group A". This user type only allows the wards
assigned by the installation company or master
user to be set and unset. This user type does not
have access to any user menus.
Users 02-31 can be programmed as "Code Set
Group B". This user type only allows the wards
assigned by the installation company or master
user to be set and unset. This user type does not
have access to any user menus.
Users 02-31 can be programmed as "Code Set
Group C". This user type only allows the wards
assigned by the installation company or master
user to be set and unset. This user type does not
have access to any user menus.
Setup New Users Flowchart
- TS790+ & TS900+ 1
- Contents 3
- Overview 5
- TSXNODE 6
- TS900 NODE (Obsolete) 6
- ID Node (TS900 IDNODE) 6
- TS700 LEC 6
- Specifications 7
- System Installation 8
- Remote Network Wiring 9
- Control Panel Installation 10
- Control Panel PCB Layout 11
- Mains Connection 13
- Battery Connection 13
- Remote Keypads 13
- Installation Procedure 14
- Engineer’s Keypad 15
- XNode (TS900+) 15
- A B C D E 16
- TS900 Node Layout (Obsolete) 17
- TS700 LEC Installation 18
- Wiring Detection Circuits 18
- External Sounder Connections 19
- Program circuit 20
- Auxiliary Tamper 21
- Extension Loudspeakers 21
- Digicom/RedCARE Installation 21
- Plug-on Digicom Installation 21
- Connecting a Printer 22
- Programmable Outputs 24
- Pre Power-Up Checks 25
- Initial Power-Up 25
- Power-Up Checks 26
- NVM Defaults 26
- Engineer’s Menu 1 28
- Panel Outputs [1.1] 29
- Digicom Outputs [1.2] 29
- Digicom Channels [1.3] 29
- Programmable Output Types 29
- Program Circuits [1.4] 32
- Circuit Attributes 33
- System Timers [1.5] 34
- Setting Modes [1.6] 37
- Do System Print [1.7] 38
- Configuration [1.9] 38
- Goto User Menu 1 [1.0] 41
- Relearn Hardware [1.C] 42
- Engineers Menu 2 43
- View Circuits [2.1] 44
- Set System Time [2.2] 44
- Set System Date [2.3] 44
- Change Passcode [2.4] 44
- Chime Circuits [2.5] 45
- Alter 24Hr Group [2.6] 45
- Print System Log [2.7] 45
- Configure Wards [2.8] 45
- View System Log [2.9] 46
- Log Event Codes 47
- Reset User Code 1 [2.0] 48
- Start Call Back [2.A] 48
- Engineer’s Menu 3 49
- Time Switches [3.1] 50
- Part Set Groups [3.2] 51
- Code Set Groups [3.3] 51
- Reset Message 52
- Banner Message 52
- XNode Outputs [3.8] 53
- Built In Tests [3.9] 53
- Voltage 54
- Test Digi Outputs 54
- Custom Output - Example 1 55
- Custom Output - Example 2 55
- Custom Output - Example 3 55
- Modem Password Flowchart 56
- Modem site Number Flowchart 56
- Program Digi Flowchart 57
- Reset Digicom 58
- Appendices 59
- Ward(s) 62
- Alarm Abort Operation 65
- Text Editing Keys 66
- Setup New Users 66
- Setup New Users Flowchart 67
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Menvier Security TS790+
(12 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.843 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce