Menvier Security TS400 Uživatelský manuál stáhnout pdf (Strana 8)

Setting with a Zone Open

If an attempt is made to set or part-set the system with one or more zones open, e.g., a door left

open or detector still active etc. The sounder will give an interrupted tone and the display will

indicate the zone circuits that are in fault.

* If the passcode is not entered before the exit timer expires, the system will initiate an internal

alarm and if fitted the external strobe light will operate.

Resetting after an Alarm

If an alarm has occurred during the set or part-set condition, the display will indicate the first

detection zone that was activated when the user unsets the system. Once the cause of the alarm

has been established the system must be reset. Your system will have been configured by the

installation company to reset by one of the following methods:

User Reset - Thisallowstheuserstoresetthesystemfollowinganalarmactivation.

Engineer Reset - This requires an engineer to attend site and reset your system

following an alarm activation.

Remote Reset - This feature allows user 1 to reset the system following an alarm

activation. The user is required to contact the installation company

andquotea`ResetCode',thisinturnisenteredintoacodegenerator

and a unique `Remote Reset Code' is generated. On entering this

code at the control panel, the system resets.

Operating the System TSD402 User Manual

UNSET

Ente r first two digits of passcode t hen

]

(e. g. ,

5 6 ]

)

CF- 1 2 3 4 5 F

Setting with Zones Open

The display sho ws the zones that

are open and sounder gives an

interupted tone

UNSET

Investigate the cause and

repeat Setting proced ure

CF = Circuit Fault

1 = Zone 1 open

2 = Zone 2 open

3 = Zone 3 open

4 = Zone 4 open

5 = Zone 5 open

F = Final Exit open

Enter your passcode *

(e.g.,

5 6 7 8

)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Menvier Security TS400 Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Menvier Security TS400