Menvier Security TS900+ Uživatelský manuál stáhnout pdf (Strana 10)

Unsetting The System

The unsetting of the alarm system can be performed from any remote keypad.

To unset your alarm system, proceed as follows:

1. Enter the premises via the prescribed

entry route and proceed directly to the

remote keypad. The internal sounders

generate an interrupted tone. The display

will show the remaining entry time, e.g.,

2. Enter your passcode XXXX

before the entry timer expires. The internal

sounders will stop and the display will show:

3. After 5 seconds the “SYSTEM OPEN”

message will disappear and the display will

show the time, (date and banner text, LCD

only) e.g.,

If the entry time is exceeded an alarm is generated from the internal sounders and the

“Second Entry” timer is started. If at the end of the “Second Entry” timer the alarm system

has not been unset a full alarm condition will occur. If the installation company has set the

“Second Entry” timer to zero the full alarm will occur when the first entry timer expires.

If during the entry procedure the user strays from the prescribed entry route and activates

a detection circuit a full alarm will occur (internal sounders and external sounders). If the

alarm system is fitted with a remote signalling device such as a digicom this will also be

triggered and police action will be taken. However, the alarm system may be

programmed with an “Entry Abort” feature which will allow a further pre-set time delay to

occur if a detection circuit is accidentally triggered during the entry procedure. This will

delay the triggering of the remote signalling device and allow the user time to unset the

system. The delay is normally set to 90 seconds by your installation company.

Full Set Entry Time: __________________

Second Entry Time: __________________

Part-set Entry Time: __________________

Entry Abort Delay: __________________

Operating The System TS790+ & TS900+ User Manual

Enter Your Code

Time left > 0025

0025

SYSTEM OPEN

08:30 Sun 28 Apr

OPEN

ABC SECURITY

08:30 Sun 28 Apr

08:30

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 56 57

Žádné komentáře

Menvier Security TS900+ Uživatelský manuál Strana 10